Handy Hint: June 2013

Handy Hint: June 2013

Holds three-point hitch steady

Rerod holds three-point hitch steady

I made this three-point arm holder by cutting a piece of rerod about 2 inches longer than the width from outside to outside of the arms. I welded a washer on one end, and on the other end I drilled a 1/4-inch hole and stuck a hitch safety pin through it (with a washer between the arm and pin). Now we aren’t replacing bungees or baler twine all the time.

Matt Lengacher, Indiana

Return to the Handy Hints page